Monitoring The Running Status Of Msdp; Debugging Msdp - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
The (S, G) information in SA Cache cannot be restored after you clear it. So, confirm the action
before you use the command.
Procedure
l
----End

8.10.3 Monitoring the Running Status of MSDP

During the routine maintenance, you can run the display commands in any view to know the
running of MSDP.
Context
In routine maintenance, you can run the following commands in any view to check the running
status of MSDP.
Procedure
l
l
l
l
l
----End

8.10.4 Debugging MSDP

When a fault occurs during the running of MSDP, run the debugging commands in the user view
and check the contents of sent and received packets for fault location.
Issue 01 (2011-10-26)
CAUTION
Run the reset msdp sa-cache [ group-address ] command in the user view to clear the
entries in MSDP SA Cache.
Run the display msdp brief [ state { connect | down | listen | shutdown | up } ] command
in any view to check brief information about the MSDP peer status.
Run the display msdp peer-status [ peer-address ] command in any view to check detailed
information about the status of an MSDP peer of the public network instance.
Run the display msdp sa-cache [ group-address | source-address | { 2-byte-as-number |
*
4-byte-as-number } ] command in any view to check the (S, G) information in SA Cache.
Run the display msdp sa-count [ 2-byte-as-number | 4-byte-as-number ] command in any
view to check the number of (S, G) entries in MSDP Cache.
Run the display msdp control-message counters [ peer peer-address | message-type
{ source-active | sa-request | sa-response | keepalive | notification | traceroute-
request | traceroute-reply | data-packets | unknown-type } ]
check statistics about the received, sent, and discarded MSDP messages.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MSDP Configuration
*
command in any view to
223