Configuring Static Rpf Peers - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
Establish the MBGP peer relationship between two RPs of different ASs and do as follows on
the MBGP peers:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
msdp
MSDP is enabled in the public network instance, and the MSDP view is displayed.
Step 3 Run:
peer peer-address connect-interface interface-type interface-number
An MSDP peer connection is configured.
The parameters of the command are explained as follows:
l peer-address: specifies the address of a remote MSDP peer. The address is the same as that
l interface-type interface-number: specifies the local interface connected to the remote MSDP
Step 4 (Optional) Run:
peer peer-address description text
The description of the MSDP peer is added.
The configuration helps to distinguish the remote MSDP peers and manage the connections with
the remote MSDP peers.
The parameters of the command are explained as follows:
l peer-address: specifies the address of a remote MSDP peer.
l text: specifies the description text. The text is a string of 80 characters.
----End

8.3.4 Configuring Static RPF Peers

You can configure a static RPF peer relationship between RPs in different ASs so that PIM-SM
domains in different ASs can share multicast source information.
Context
Issue 01 (2011-10-26)
NOTE
If the two RPs set up the BGP peer relationship, it is not necessary to set up the MBGP peer relationship
between them.
of the remote BGP or MBGP peer.
peer. The interface is the same as the local BGP or MBGP interface.
NOTE
If Configuring Inter-AS MSDP Peers on MBGP Peers
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MSDP Configuration
is complete, skip the configuration.
198