Checking The Configuration; Configuring Many-To-Many Multicast Vlan Replication; Establishing The Configuration Task - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Add a network-side interface to a multicast VLAN.
1.
2.
3.
Step 3 Add a user-side interface to a user VLAN.
1.
2.
----End

3.4.5 Checking the Configuration

Procedure
l
----End
Example
Run the display l2-multicast-bind [ mvlan vlan-id ] command to view information about a
multicast VLAN and its user VLANs.
<Quidway> display l2–multicast-bind mvlan 90
Port
------------------------------------------------------------------
GigabitEthernet0/0/1
Total Table(s) : 1
3.5 Configuring Many-to-Many Multicast VLAN
Replication
This section describes how to bind multiple user VLANs to multiple multicast VLANs.

3.5.1 Establishing the Configuration Task

Issue 01 (2011-10-26)
Run the interface interface-type interface-number command to enter the network-side
interface view.
Configure the network-side interface as a trunk or hybrid interface and add the interface to
the multicast VLAN. For the configuration procedure, see Dividing a LAN into VLANs
Based on Ports.
Run the quit command to return to the system view.
Run the interface interface-type interface-number command to enter the user-side interface
view
Configure the user-side interface as a trunk or hybrid interface and add the interface to the
user VLAN. For the configuration procedure, see Dividing a LAN into VLANs Based on
Ports.
Run the display l2-multicast-bind [ mvlan vlan-id ] command to view information about
a multicast VLAN and user VLANs bound to the multicast VLAN on an interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Multicast VLAN Replication Configuration
Startvlan Endvlan
901 --
Mvlan
90
44