Optional) Setting The Maximum Number Of Multicast Groups That Hosts Attached To An Interface Can Join; Optional) Configuring The Mld Version - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface, a GE interface or an Eth-Trunk interface.
Step 3 Run:
mld-snooping static-router-port vlan vlan-id
The interface is configured as a static router interface.
----End
10.3.6 (Optional) Setting the Maximum Number of Multicast
Groups that Hosts Attached to an Interface Can Join
Context
To limit the number of multicast programs available to users and multicast data traffic on an
interface, set the maximum number of multicast groups that users can join.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface, a GE interface, or an Eth-Trunk interface.
Step 3 Run:
mld-snooping table limit table-limit vlan vlan-id
The maximum number of multicast groups that hosts attached to the interface can join.
If vlan-id is specified, the maximum number of multicast groups that hosts attached to the
interface in a specified VLAN can join is set.
----End

10.3.7 (Optional) Configuring the MLD Version

Issue 01 (2011-10-26)
NOTE
Before using the mld-snooping static-router-port vlan vlan-id command, ensure that the interface is
added to the VLAN specified by vlan-id; otherwise, the configuration fails.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MLD Snooping Configuration
260