Huawei Quidway s3700 series Configuration Manual page 202

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
# Run the display pim routing-table command to view the PLM routing table. SwitchC
functions as the DR. The (S, G) and (*, G) entries exist. The displayed information is as follows:
[SwitchC] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
(10.1.7.1, 225.1.1.1)
----End
Configuration Files
l
l
#
sysname SwitchB
#
vlan batch 100 200
#
multicast routing-enable
#
bfd
#
interface Vlanif100
ip address 10.1.1.1 255.255.255.0
pim sm
igmp enable
pim bfd enable
pim bfd min-tx-interval 200 min-rx-interval 200 detect-multiplier 3
#
interface Vlanif200
ip address 10.1.2.1 255.255.255.0
pim sm
#
interface Ethernet0/0/1
port hybrid tagged vlan 200
#
interface Ethernet0/0/2
port hybrid tagged vlan 100
#
ospf 1
area 0.0.0.0
network 10.1.1.0 0.0.0.255
Issue 01 (2011-10-26)
RP: 10.1.5.2
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface:
Upstream neighbor: 10.1.2.2
RPF neighbor: 10.1.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif100,
Protocol: igmp, UpTime: 00:13:46, Expires:-
RP: 10.1.5.2
Protocol: pim-sm, Flag: SPT ACT
UpTime: 00:00:42
Upstream interface: vlanif200
Upstream neighbor: 10.1.2.2
RPF neighbor: 10.1.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlanif100
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
SwitchA needs to be configured with only basic PIM SM functions. The configuration file
is not provided here.
The following is the configuration file of Switch B. The configuration file of Switch C is
similar to the configuration file of Switch B, and is not provided here.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vlanif200,
7 PIM-SM (IPv4) Configuration
189