Configuration Examples; Example For Configuring Basic Igmp Functions - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
Procedure
l
l
----End

5.7 Configuration Examples

This section provides several configuration examples of IGMP.

5.7.1 Example for Configuring Basic IGMP Functions

Networking Requirements
On the network as shown in
to implement multicast on the network to enable hosts to receive the Video On Demand (VOD)
information.
When the hosts connected to a certain interface need to receive a popular program for a long
time, you can add the interface to a multicast group statically. As shown in the following figure,
if HostA needs to receive the multicast data from the multicast group 225.1.1.1 for a long time,
you need to add Eth 0/0/1 on the Switch A to the multicast group 225.1.1.1 statically.
Issue 01 (2011-10-26)
CAUTION
Run the debugging igmp { all | event | leave [ basic-acl-number ] | report [ advanced-
acl-number ] | query [ basic-acl-number ] | timer } command to enable the debugging of
IGMP.
Run the debugging igmp ssm-mapping [ advanced-acl-number ] command to enable the
debugging of SSM mapping.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-1, the unicast routing function is normal. You are required
5 IGMP Configuration
87