Charging The Battery Pack; Inserting The Microsd Card - Icom ID-51A Basic Instructions

■ Charging the battery pack

Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.
• BE SURE to turn OFF the power while charging. Other-
wise the attached battery pack cannot be charged.
• While charging, the charging icon "
eleven level steps along with the word "Charging...".
• The icon disappears when the battery pack is completely
charged.
Transceiver
BE SURE to attach the battery
pack before connecting the
DC cable.
BP-271
to
[DC IN]
BE SURE to turn
power OFF while
charging.
• Charging time: BP-271 approximately 3.0 hours
BP-272 approximately 4.5 hours
" sequentially shows
BC-167S
to an AC outlet
The BC-167SA, BC-167SD and
BC-167SV have different shapes.
STARTING INITIAL SETUP

■ Inserting the microSD card

Make sure the transceiver turns OFF.
q
Lift OFF the [micro SD] slot cover on the side panel.
w
With the terminals facing the front, insert the card
e
into the slot until it locks in place, and makes a 'click'
sound.
DO NOT touch the terminals.
NEVER forcibly or in-
versely insert the card.
It will damage the card
and/or the slot.
[micro SD] slot
microSD card
Terminals facing
the front
Completely close the [micro SD] slot cover.
r
2
2
Slot cover
10