Table of Contents
Advertisement
1.
The LAN subnet is defaulted and subject to "192.168.1.x/24". Therefore,
the access to the management interface requires an IP address from the same
subnet
2.
The management interface may not be accessible once the boxes of HTTP
and HTTPS are unticked prior to the configuration of permitted IP under System
> Administration.
3.1.1.2 Configuring the WAN Interface
Step 1. Under Network > Interface, click Modify corresponding to Port 2
and select WAN for Interface Type.
Step 2. Configure the Keepalive Properties as follows:
If "ICMP "is selected as the type, then enter the Alive Indicator
Site IP.
If "DNS" is selected as the type, then enter the DNS IP Address
and the Domain Name.
Enter the Minimum Interval.
Keepalive Properties is used for network connectivity detection. Consequently,
the accuracy of detection is subject to the availability of Alive Indicator Site IP,
DNS IP Address and Domain Name.
Step 3. Configure the Interface Type as follows:
When connecting using Static IP Address:
Enter the IP Address, Netmask and Default Gateway.
Enter the Max. Downstream Bandwidth and the Max.
Tick the boxes of "Ping/ Tracert", "HTTP" and "HTTPS".
Click OK.
When connecting using Dynamic IP Address (Cable Modem
User):
Click Renew to obtain an IP address automatically.
Keepalive Detection Using ICMP
Keepalive Detection Using DNS
Upstream Bandwidth.
Gigabit Multi-Homing VPN Security Gateway
45
MH-2300
Advertisement
Table of Contents
