Dhcp - Planet MH-2300 User Manual

Step 2. The LAN subnets of 192.168.10.x/24, 192.168.20.x/24 and
192.168.1.x/24 are interconnected and are connected to the Internet
through MH-2300 via NAT.
The Deployment of Multiple LAN Subnets to Access the Internet via Routing

2.2.5 DHCP

2.2.5.1 Automatically Allocating IP Addresses to LAN PCs
Step 1. Go to System > Configuration > DHCP and then set as shown
below:
Select the radio box of "Enable DHCP".
Untick the box of "Obtain DNS server address automatically".
IPv4 DNS Server 1: Type an IP as the primary DNS Server.
IPv4 DNS Server 2: Type an IP as the secondary DNS Server.
IPv4 WINS Server 1: Type an IP as the primary WINS Server.
IPv4 WINS Server 2: Type an IP as the secondary WINS Server.
Lease Time :Type a lease time for the allocated IP addresses (24
hours by default).
Configure the following settings based on your LAN or DMZ
subnet:
IPv4 Range 1 : Specify the first range of the IP pool (must be
IPv4 Range 2: Specify the second range of the IP pool (must
within the same subnet). By default, it is between
192.168.1.2 and 192.168.1.254.
be within the same subnet and not repeated from those in
the first range).
Gigabit Multi-Homing VPN Security Gateway
34
MH-2300