Planet MH-2300 User Manual page 188

Gigabit Multi-Homing VPN Security Gateway
MH-2300
Step 13.
IPSec VPN tunnel has been successfully established between the
two sites.
The Deployment of an IPSec VPN Network between Two Units of MH-2300
4.8.1.2 Using a Unit of MH-2300 and a Windows 7 PC to
Establish an IPSec VPN Tunnel
Prerequisite Configuration (Note: The IP addresses are used as examples
only)
Company A is running a unit of MH-2300 with the following configuration:
Port 1 is defined as LAN 1 (192.168.10.1) and is connected to the LAN subnet
192.168.10.x / 24.
Port 2 is defined as WAN 1 (61.11.11.11) and is connected to the Internet via
the ADSL modem (ATUR).
Company B is running a Windows 7 PC with an IP address of 211.22.22.22.
This example will be using a unit of MH-2300 and a Windows 7 PC to establish
a VPN tunnel for private network access as follows.
For Company A, set as shown below:
188