Host Table - Planet MH-2300 User Manual

1. The description of the symbols used in Dynamic DNS are as follows:
Symbol
Description
2. If you do not have a Dynamic DNS account, you may select a service
provider from the drop-down list and then click Sign up next to it to register an
account.
3. The Real IP Address can be specified by either ticking the box of "Use the
IP of" or simply entering the address in the field.

2.2.7 Host Table

Step 1. Go to System > Configuration > Host Table and then set as shown
below:
Click New Entry.
Hostname: Specify a name for the host.
IP Version: Select "IPv4".
IP Address: Type the private IP address that the host is mapped
to.
Click OK.
Host Table requires the Preferred DNS server on the local PCs to be specified
as the same as the LAN or DMZ interface address to be effective. For further
information on configuring Preferred DNS server, please refer to:
http://windows.microsoft.com/en-US/windows-vista/Change-TCP-IP-settings
Dynamic DNS Settings Successfully Added
Connection
Successful
Adding a Hostname
Gigabit Multi-Homing VPN Security Gateway
Connection Connected
Failed
37
MH-2300