Table of Contents
Advertisement
Step 12.
Under Policy > Incoming, click New Entry and then set as
shown below:
Select the defined trunk from the VPN Trunk drop-down list.
Click OK.
Creating a Policy to Apply the VPN Trunk Settings
For B Company, set as shown below:
Step 1. Under Policy Object > VPN > IPSec Autokey, click New Entry and
then set as shown below:
Step 2. Enter "VPN_B" in the Name field and then select "Port2 (WAN1)" for
Interface.
Gigabit Multi-Homing VPN Security Gateway
Policy Successfully Created
The IPSec Autokey Rule Table
Name and Interface Settings
237
MH-2300
Advertisement
Table of Contents
