Table of Contents
Advertisement
In the New Rule Properties dialog box, click the Authenticaion
Methods tab. Next, select "Kerberos" from the Authetication
method preference order and then click Edit.
In the Edit Authentication Method Properties dialog box,
follow the steps below:
Tick the box of "Use this string (preshared key)" and enter
"123456789" in the corresponding field.
Click OK to complete the settings.
Select "Preshared Key" from the Authentication method
preference order.
In the New Rule Properties dialog box, click the Tunnel Setting
tab:
Select the radio box of "Tunnel endpoints are specified by
these IP addresses".
Specify the IPv4 tunnel endpoint, i.e., 211.22.22.22.
In the New Rule Properties dialog box, click the Connection
Type tab:
Tick the box of "All network connections".
Click Apply.
Click OK to complete the settings.
Select "VPN_B Remote To Local" from the IP Security rules.
Gigabit Multi-Homing VPN Security Gateway
216
MH-2300
Advertisement
Table of Contents
