Diagnostic Tools; Ping - Planet MH-2300 User Manual

1. The Traffic Grapher requires manual activation for each network policy,
respectively.
2. By traffic direction, statistical graphs are categorized into six types, namely
outgoing, incoming, WAN-to-DMZ, LAN-to-DMZ, DMZ-to-WAN, DMZ-to-LAN,
LAN-to-LAN, and DMZ-to-DMZ.
3. The statistical graphs from a specific time can be obtained by using the
date and time pickers (drop-down lists) and the Refresh button.

8.3 Diagnostic Tools

The device provides Ping and Traceroute commands as well as a
Web-based packet capture tool to help diagnose network issues with particular
internal or external nodes.

8.3.1 Ping

Step 1. To test whether a host is reachable across an IP network, go to
Monitoring > Diagnostic Tools > Ping and then configure as shown
below:
Destination IP / Domain name : Type the Destination IP or
Domain name.
Packet Size : Configure the size of each packet. (32 Bytes by
default)
Count : Configure the quantity of packets to send out. (4 by
default)
Wait Time : Specify the duration to wait between successive pings.
(1 second by default)
Select the interface from the Interface drop-down list.
Click OK.
The Parameters for Pinging a Host
371
Gigabit Multi-Homing VPN Security Gateway
MH-2300