Planet MH-2300 User Manual page 177

A PPTP VPN connection is maintained using Echo-Request mechanism and
can be manually connected by ticking the box of "Manual connection" within the
PPTP client rule.
Terms in Trunk
Status
The description of the symbols used for connection status are as follows.
Name
The name of a trunk rule. Note that the name cannot be repeated under
Policy Object > VPN > Trunk.
Local Subnet
The IP address of source subnet.
Remote Subnet
The IP address of destination subnet.
Tunnel Selecton
The IPSec or PPTP tunnels that are included in the trunk.
Configuration
Click Modify or Remove to edit or delete the corresponding rule.
Once the Trunk Load Balancing is enabled, the VPN tunnels will be
load-balanced to increase the link speed. (Note that this feature requires two
units of the same model at both ends of a VPN connection to be activated, and is
also subject to the Load Balancing Mode specified under Network > Interface.)
Terms in Trunk Group
Name
The name of a trunk group. Note that the name cannot be repeated under
Policy Object > VPN > Trunk Group.
Symbol
Description Disconnected Connected
The Trunk Rule Table
177
Gigabit Multi-Homing VPN Security Gateway
MH-2300