Table of Contents
Advertisement
For Company A, set as shown below:
Step 1. Go to Policy Object > VPN > PPTP Server and then set as shown
below:
Click Modify.
Tick the box of "Enable PPTP server".
Tick the box of "Encryption".
Tick the box of "Split Tunneling via" and then select the
corresponding NIC port.
Type in "0" in the minute(s) field to stay connected.
Specify the Client IP / IP Range under the Client IP Assignment
section.
Click OK to complete the settings.
1.
The Internet access via PPTP VPN tunnel can be allowed or blocked when
connecting to the MH-2300 from an external network.
2.
The PPTP VPN tunnels can be specified an idle timeout value (unit: minute)
respectively to automatically disconnect.
3.
The access to an IPSec VPN network requested by a PPTP VPN client
needs to be achieved by assigning a LAN 1 (192.168.10.x) address to the
client-side user. In such a case, the PPTP VPN tunnel will be only accessible
through the WAN address of IPSec VPN network.
Gigabit Multi-Homing VPN Security Gateway
Enabling the PPTP Server
293
MH-2300
Advertisement
Table of Contents
