Table of Contents
Advertisement
Step 4. Go to Policy > Outgoing and configure the following settings:
Click New Entry.
Source Address: Specify a name for the outgoing policy, e.g.,
"LAN 1_Subnet1".
Action: Tick the box of "Permit all outgoing connections".
Click Advanced Settings.
Under the IP Redirection section, select "Automatic" for Port 2
(WAN1) and Port3 (WAN2).
Click OK.
Click New Entry.
Source Address: Specify a name for the outgoing policy, e. g.,
"LAN 2_Subnet 2".
Action: Tick the box of "Permit all outgoing connections".
Under the IP Redirection section, select "Routing" for Port 2
(WAN1) and select "Automatic" for Port 3 (WAN2).
Click OK.
Creating a Policy to Apply the First LAN Address Settings
Gigabit Multi-Homing VPN Security Gateway
29
MH-2300
Advertisement
Table of Contents
