Table of Contents
Advertisement
Step 21. Under Policy > Incoming, click New Entry and then set as shown
below:
Select the VPN trunk for VPN Trunk.
Click OK to complete the settings.
Creating a Policy to Apply the VPN Trunk Settings
For Company B, set as shown below:
Step 1. Go to Policy Object > VPN > IPSec Autokey, and then click New
Entry.
Step 2. Type VPN_01 in the Name field and then select Port2(WAN1) for
WAN Interface.
Step 3. For Remote Settings, select Remote Gateway (Static IP or
Hostname), and enter the management address of A Company (WAN
Gigabit Multi-Homing VPN Security Gateway
Policy Successfully Created
IPSec Autokey Screen
Name and WAN Interface Settings
249
MH-2300
Advertisement
Table of Contents
