Table of Contents
Advertisement
2.2.1.5 Rebooting the MH-2300
Step 1. To reboot the MH-2300, go to System > Configuration > Settings
and set as shown below:
Under the Device Reboot section, click
middle bottom of the screen.
A confirmation dialogue box appears and asks "Are you sure you
want to reboot the system?
Click OK to reboot or Cancel to abort.
2.2.2 Date / Time
2.2.2.1 Setting the System Clock
Step 2. Under System > Configuration > Date/Time, set as shown below:
Configure the GMT offset.
Tick the box of Synchronize to an NTP server.
Type the IP address of the Internet time server in the Server IP or
Hostname field.
Set an interval time to update system clock.
Click OK.
1. Click Sync to synchronize the system clock with that on a local computer.
2. For assistance in configuring GMT offset and NTP sever, click Assist Me
next to the corresponding setting.
Clicking the Button to Reboot the System
The System Clock Settings
25
Gigabit Multi-Homing VPN Security Gateway
MH-2300
at the
Advertisement
Table of Contents
