Table of Contents
Advertisement
Step 1. Go to Policy Object > VPN > IPSec Autokey and then click New
Entry.
Step 2. Enter "VPN_A" in the Name field and then select "Port2 (WAN1)" for
Interface.
Step 3. Select "Remote Gateway or Client (Dynamic IP)" for Remote
Settings.
Step 4. Select Pre-Shared Key from the Authentication Method drop-down
list, and enter a string. (The maximum length of the string is 62
characters.)
Step 5. In the Encryption and Data Integrity Algorithms section, select
"3DES" for Encryption Algorithm, select "MD5" for Authentication
Algorithm, and then select "Diffie-Hellman 2" for Key Group.
The IPSec Autokey Rule Table
Name and Interface Settings
Remote Settings
Authentication Method Settings
Encryption and Data Integrity Algorithms
189
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
