Traffic Grapher - Planet MH-2300 User Manual

8.2 Traffic Grapher

This chapter will cover the operation of Traffic Grapher, which allows for
viewing the statistical graphs of a WAN interface or a network policy.
WAN Traffic provides the statistical graphs of traffic or packets that are
processed through a network interface.
Policy-based Traffic provides the statistical graphs of traffic or packets that
are managed by a network policy.
Terms in Traffic Grapher
Statistical Graph
Vertical axis indicates the network traffic or packets.
Horizontal axis indicates the time.
Direction / Source / Destination / Service / Action
The table headings of the network policies that the Traffic Grapher is
enabled.
Time
The statistical graphs are available in different time units, including minute,
hour, day and week.
The update intervals of statistical graphs are as follows:
Minutes：Statistics are refreshed on a minutely basis.
Hours：Statistics are refreshed on a hourly basis.
Days：Statistics are refreshed on a daily basis.
Weeks：Statistics are refreshed on a weekly basis.
Bits/sec/ Bytes/sec/ Utilization/ Accumulated (Total)
The basic units of network traffic or packets are as follows:
Bits/sec: Data transmission is measured in bits per second.
Bytes/sec: Data transmission is measured in byte per second.
Utilization: Traffic or packets are shown by the proportion relative to
the Max. Downstream / Upstream Bandwidth specified within a
WAN interface.
Accumulated (Total): Traffic or packets are shown by the total traffic
or packets accumulated.
Gigabit Multi-Homing VPN Security Gateway
366
MH-2300