Table of Contents
Advertisement
This example will be using two units of MH-2300 to establish a VPN tunnel for
providing the client-side users with Internet access as follows:
For Company A, set as shown below:
Step 1. Go to Policy Object >VPN > PPTP Server and then set as shown
below:
Click Modify.
Tick the box of "Enable PPTP server".
Tick the box of "Encryption".
Tick the box of "Split Tunneling via" and then select the
corresponding NIC port.
Type in "0" in the minute(s) field to stay connected.
Specify the Client IP / IP Range under the Client IP Assignment
section.
Click OK to complete the settings.
Gigabit Multi-Homing VPN Security Gateway
Enabling the PPTP Server
287
MH-2300
Advertisement
Table of Contents
