Step 3. Go to Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
Specify a name for the VPN Trunk.
Local Settings: Select "LAN" for Interface and specify the subnet
and netmask for Company A.
Remote Settings : Select Remote Client.
Select "PPTP_Server_PPTP_Connection" from the Available
Tunnels column on the left and then click Add.
Tick the box of "Enable NetBIOS Broadcast over VPN".
Click OK to complete the settings.
The Local Settings from Step 3 must be specified with the LAN subnet of an
IPSec VPN network if the access to it is requested by a PPTP VPN client.
Creating a Trunk for the VPN Traffic
Policy Successfully Created
295
Gigabit Multi-Homing VPN Security Gateway
MH-2300