Table of Contents
Advertisement
Step 2. Under Network > Interface, set as shown below:
Click Modify corresponding to Port 3.
Select "DMZ" for Interface Type.
Select "Transparent Bridging" for Connecion Type.
Tick the boxes of "Ping/ Tracert", "HTTP" and "HTTPS".
Click OK.
Step 3. Go to Network > Interface Group and then set as shown below:
Select "Group 1" for Port2(WAN1) and Port3(WAN2).
Click OK.
Modifying the DMZ Interface Settings
Configuring the Interface Group Settings
57
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
