Table of Contents
Advertisement
Step 2. Under Policy > Outgoing, set as shown below:
Application Blocking: Select the rule.
Click OK.
Creating a Policy to Apply the P2P Blocking Settings
P2P applications are the major cause of bandwidth exhaust and also are hard to
block its use due to the port alternation. Accordingly, Application Blocking
provides a more effective way to block the use of P2P applications by its packet
signatures rather than port number.
4.7 Virtual Server
This chapter will cover the configuration of Virtual Server, which allows for
providing services to the public by mapping public IP addresses to private IP
addresses.
Mapped IPs: Maps a public IP address to a private IP address by using
Network Address Translation (NAT) to provide multiple services.
Port Mapping: Maps a public IP address to multiple private IP addresses
by using Port Address Translation (PAT) to provide multiple services or a
Gigabit Multi-Homing VPN Security Gateway
Policy Successfully Created
152
MH-2300
Advertisement
Table of Contents
