Traceroute - Planet MH-2300 User Manual

8.3.2 Traceroute

Step 1. Under Monitoring > Diagnostic Tools > Traceroute the Traceroute
command can be used by the MH-2300 to send out packets to a
specific address to diagnose the quality of the traversed network.
Destination IP / Domain name : Enter the destination address or
domain name for the packets.
Packet Size : Configure the size of each packet. (40 Bytes by
default)
Max Time-to-Live : Enter the maximum number of hops. (30 by
default)
Wait Time : Specify the duration to wait between successive pings.
(2 seconds by default)
Interface : Select the interface that the packets will originate from.
Click OK.
The Parameters for Tracerouting a Host
374
Gigabit Multi-Homing VPN Security Gateway
MH-2300