Planet MH-2300 User Manual page 23

2.2.1.3 Resetting the System to Factory Settings
Step 1. Under System > Configuration > Settings, set as shown below:
Tick Reset to factory default settings under the System
Settings section.
Click OK at the lower right corner to proceed.
Click OK in the confirmation box to execute the procedure.
Resetting the System to Factory Default Settings and Formatting the USB Disk
2.2.1.4 Enabling Email Notifications
Step 1. Under System > Configuration > Settings, set as shown below:
Under the Name Settings section:
Type your company name in the Company Name field.
Type a name in the Device Name field.
Under the Email Notification Settings section:
Tick Enable email notifications.
Sender Address: Type a sender address. (Some IPs
SMTP Server: Type the IP address of SMTP server.
Email Address 1: Type the email address of the first
Email Address 2: Type the email address of the second
Confirming to Restore System Settings
demand a sender address for email deliveries)
recipient.
recipient.
Gigabit Multi-Homing VPN Security Gateway
23
MH-2300