Wan Ip Address Configuration Via Web Configuration Interface - Planet VIP-281GS User Manual

Note

WAN IP address configuration via web configuration interface

Execute your web browser, and insert the IP address (default: 172.16.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: admin / 123), browse to "WAN Setting"
configuration menu, you will see the configuration screen below:
Connection Type
Static IP
DHCP
PPPoE
Please consult your ISP personnel to obtain proper PPPoE/IP
address related information, and input carefully.
Hint
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.
Please locate your PC in the same network segment
(172.16.0.x) of VIP-281GS. If you're not familiar with
TCP/IP, please refer to related chapter on user's manual
CD or consult your network administrator for proper network
configurations.
Figure 2-2. WAN port configuration
Data required.
The ISP will assign IP Address, and related information.
Get WAN IP Address automatically; it is no need to
configure the DHCP settings.
The ISP will assign PPPoE username / password for
Internet access,
Table 2-1. WAN port configuration descriptions
11