Table of Contents
Advertisement
Step 9. The IPSec autokey rule is successfully added.
Step 10.
Under Policy Object > VPN > Trunk, click New Entry and then
set as shown below:
Name: Specify a name for the VPN Trunk.
Local Settings: Select "LAN" for Interface and specify the subnet
and netmask for Company B.
Remote Settings: Specify the subnet and netmask of Company
A.
Tunnel Selection: Select "VPN_B" from the Available Tunnels
column on the left, and then click Add.
Tick the box of "Enable NetBIOS Broadcast over VPN".
Click OK to complete the settings.
IPSec Autokey Rule Successfully Added
Adding a VPN Trunk
239
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
