Table of Contents
Advertisement
Step 9. The IPSec autokey rule "VPN_01" is successfully added.
IPSec Autokey Rule "VPN_01" Successfully Added
Step 10. Under Policy Object > VPN > IPSec Autokey, click New Entry.
Step 11. Enter "VPN_02" in the Name field and select "Port3 (WAN2)" for
Interface.
Step 12. Remote Settings: Select "Remote Gateway (Static IP or
Hostname)" and enter the WAN 2 gateway address of Company B.
Step 13. Select "Pre-Shared Key"for Authentication Method and then type
the same key as previously specified.
Step 14. Under the Encryption and Data Integrity Algorithms section,
select "3DES" for Encryption Algorithm, "MD5" for Authentication
Algorithm and "Diffie-Hellman 1" for Key Group.
Step 15. Under the IPSec Settings section, select the radio box of "Use both
algorithms", and then select "3DES" for Encryption Algorithm and
The IPSec Autokey Rule Table
Name and Interface Settings
Configuring the Remote Settings
The Authentication Method Settings
Encryption and Data Integrity Algorithms
245
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
