Planet MH-2300 User Manual page 289

For Company B, set as shown below;
Step 1. Go to Policy Object > VPN > PPTP Client, click New Entry and then
set as shown below:
Type in "PPTP_Connection" in the Username field.
Type in "123456789" in the Password field.
Specify the WAN 1 gateway address of Company A in the Server
IP or Hostname field.
Tick the box of "Encryption".
Select "Port2 (WAN1)" for Interface.
Tick the box of "NAT with PPTP Client".
Click OK to complete the settings.
The Internet access via PPTP VPN tunnel requested by a PPTP client needs to
be achieved by ticking the box of "NAT with PPTP client"
Gigabit Multi-Homing VPN Security Gateway
Adding a PPTP Client
PPTP Client Successfully Added
289
MH-2300