Table of Contents
Advertisement
Step 14.
Below Encryption and Data Integrity Algorithms, select "3DES"
for Encryption Algorithm; select "MD5" for Authentication
Algorithm; select "DH 1" for Key Group.
Step 15.
Select Use both algorithms below the IPSec Algorithm, or tick
Use authentication algorithm only. If ticked Use both algorithms,
please select "3DES" for Encryption Algorithm and "MD5" for
Authentication Algorithm.
Step 16.
Select "Group 1" for PFS Key Group. Enter "3600" in the ISAKMP
SA Lifetime field and "28800" in the IPSec SA Lifetime field and then
select "Main Mode" for Mode.
Step 17.
For GRE Tunnel Settings, type "192.168.60.200" in the Local
Endpoint Address field and "192.168.60.100" in the Remote
Endpoint Address field. (Note: The local IP and the remote IP must
be configured in the same class C network.)
Step 18.
Settings completed.
ISAKMP Algorithm Settings
IPSec Algorithm Settings
Advanced Settings of IPSec Autokey
GRE Tunnel Settings
IPSec Autokey Settings Completed
252
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
