Planet MH-2300 User Manual page 215

Step 3. In the VPN_B Properties dialog box, click the Rules tab and then set
as shown below:
Click Add.
In the New Rule Properties dialog box, select the IP Filter List
tab and then click Add:
In the IP Filter List dialog box, type in "VPN_B Remote To
Select "VPN_B Remote To Local" from the IP Filter Lists.
IP Security Rule Successfully Added
Local" in the Name field and then click Add:
In the IP Filter Properties dialog box, click the
Addresses tab:
Source address: Select "A specific IP Address or
Subnet" and specify the corresponding IP address
or subnet, i.e., 192.168.10.0/24.
Destination address: Select "A specific IP Address
or Subnet" and specify the corresponding IP
address or subnet, i.e., 211.22.22.22/32.
Click OK.
Click OK to complete the settings.
In the New Rule Properties dialog box, click the Filter
Action tab, untick the box of "Use Add Wizard", and then
click Add.
Gigabit Multi-Homing VPN Security Gateway
215
MH-2300