Planet MH-2300 User Manual page 199

IP Security Policy Wizard Successfully Completed
Step 2. In the VPN_B Properties dialog box, click the Rules tab and then set
as shown below:
Untick the box of "Use Add Wizard" and click Add.
In the New Rule Properties dialog box, click the IP Filter List tab
and then click Add:
In the IP Filter List dialog box, type "VPN_B Local To
Select "VPN_B Local To Remote" from IP Filter Lists.
In the New Rule Properties dialog box, click the Filter Action tab,
untick the box of "Use Add Wizard" and then click Add:
In the New Filter Action Properties dialog box, click the
Remote" in the Name field and then click Add:
In the IP Filter Properties dialog box, click the
Addresses tab:
Source address: Select "A specific IP Address or
Subnet" and specify the corresponding IP address
or subnet, ie., 211.22.22.22/32.
Destination address: Select "A specific IP Address
or Subnet" and specify the corresponding IP
address or subnet, i.e., 192.168.10.0/24.
Click OK.
Click OK to complete the settings.
Security Methods tab and then set as shown below:
Select the radio box of "Negotiate security".
Gigabit Multi-Homing VPN Security Gateway
199
MH-2300