Software Update; Configuration - Planet MH-2300 User Manual

Step 3. A message is shown after confirming the logout.

2.1.4 Software Update

Step 1. To run a software update, go to System > Administration > Software
Update and follow the steps below:
Click Browse to locate the software.
Click OK to proceed the update.
The update takes several minutes to run through and is followed by a reboot.
During the process, DO NOT TURN OFF THE POWER, DISCONNECT THE
INTERNET, or CLOSE THE BROWSER. Any of the three will cause
unexpected errors to the system.Therefore, running the update locally is
strongly recommended.

2.2 Configuration

This chapter will cover the configuration of Settings, Date / Time, Multiple
Subnets, Routing Table, DHCP, Dynamic DNS, Host Table, and Language.
Terms in Settings
System Settings
Allowed for importing / exporting the system configuration file and resetting
system to factory default settings.
Gigabit Multi-Homing VPN Security Gateway
Confirming to Log Out
The Logout Message
Updating the Software
18
MH-2300