Table of Contents
Advertisement
For Company A, set as shown below:
Step 1. Go to Policy Object > VPN > PPTP Server and then set as shown
below:
Click the Modify button.
Tick Enable PPTP.
Tick Encryption.
Tick Allow Internet access via and then select the port.
Auto-disconnect if idle for: type 0.
Enter the Client IP – IP Range.
Click OK.
1.
The Internet access via PPTP VPN tunnel can be allowed or blocked when
connecting to the MH-2300 from an external network.
2.
Auto-disconnect if idle for: The PPTP VPN tunnels can be specified an
idle timeout value (unit: minute) respectively to automatically disconnect.
3.
To authenticate a PPTP VPN client using external RADIUS authentication
(refer to Chapter 8 for related configuration), click New Entry to define RADIUS
as the Authentication Type and add the client to the table under Policy Object
> VPN > PPTP Server.
Step 2. Go to Policy Object > VPN > PPTP Server and then set as shown
Gigabit Multi-Homing VPN Security Gateway
Enabling the PPTP Server
276
MH-2300
Advertisement
Table of Contents
