Table of Contents
Advertisement
Step9. Go to Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
Type the name in the Name field.
Local Settings: select LAN. Enter the local subnet and the mask.
Under the Remote Settings section, select Remote IP / Netmask
and then enter the local subnet and the mask.
Move the VPN_01 from the Available Tunnels column to the
Selected Tunnels column.
Tick Enable NetBIOS Broadcast over VPN.
Click OK.
Gigabit Multi-Homing VPN Security Gateway
Configuring the First Trunk
First Trunk Completed
259
MH-2300
Advertisement
Table of Contents
