Table of Contents
Advertisement
Step19.
Go to Policy Object > VPN > Trunk Group, click New Entry and
then set as shown below:
Type the name in the Name field.
Move the IPSec_VPN_Trunk_01(LAN) and
IPSec_VPN_Trunk_02(LAN) from the Available Trunks column
to the Selected Trunks column.
Click OK.
The
"IPSec_VPN_Trunk_01"
"IPSec_VPN_Trunk_02" (the VPN tunnel to Company B) under Policy Object >
VPN > Trunk are mandatory for this hub-and-spoke IPSec VPN network.
Gigabit Multi-Homing VPN Security Gateway
Configuring the Trunk Group
Trunk Group Created
(the
VPN
263
tunnel
to
Company
MH-2300
A)
and
Advertisement
Table of Contents
