Table of Contents
Advertisement
Step 5. Under Policy > Incoming, click New Entry and then set as shown
below:
Select the VPN trunk for VPN Trunk.
Click OK to complete the settings.
Creating a Policy for Allowing Incoming VPN Traffic
For B Company, set as shown below:
Step 1. Go to Start > Control Panel > Network and Internet > Network and
Sharing Center, and then set as shown below:
Select "Set up a new connection or network" under the Change
your networking settings section.
In the Set Up a Connection or Network dialog box:
Select "Connection to a workplace".
Click Next.
In the Connect to a Workplace dialog box:
Click Use my Internet connection (VPN).
Internet address: Type in "61.11.11.11".
Destination name: Specify a name.
Tick the box of "Don't connect now, just set it up so I can
Click Next.
Type in "PPTP_Connection" in the User name field.
Policy Successfully Created
connect later".
Gigabit Multi-Homing VPN Security Gateway
297
MH-2300
Advertisement
Table of Contents
