Table of Contents
Advertisement
Step 19. Under Policy Object > VPN > Trunk, set as shown below:
Name: Specify a name for VPN Trunk.
Local Settings: Select "LAN" for Interface and specify the subnet
and netmask of Company A.
Remote Settings: Specify the subnet and netmask of Company
B.
Select "VPN_01" and "VPN_02" from the Available Tunnels
column on the left, and then click Add.
Tick the box of "Enable NetBIOS Broadcast over VPN".
Click OK to complete the settings.
Gigabit Multi-Homing VPN Security Gateway
Adding a VPN Trunk
VPN Trunk Successfully Added
247
MH-2300
Advertisement
Table of Contents
