Table of Contents
Advertisement
Step 2. Go to Anomaly Flow IP > Settings and then set as shown below:
Enter the Traffic Threshold per IP. (The default value is 100)
Tick Enable Anomaly Flow IP Blocking and then type the
Blocking Time. (The default value is 60)
Tick Enable E-Mail Alert Notification.
Tick Enable SNMP traps.
Tick Enable NetBIOS notification and then type the
Administrator's IP Address.
Click OK.
Gigabit Multi-Homing VPN Security Gateway
Anomaly Flow IP Settings
349
MH-2300
Advertisement
Table of Contents
