Lan/Wan Interface Quick Configurations; Lan Ip Address Configuration Via Web Configuration Interface - Planet VIP-281 Series User Manual

Note

LAN/WAN Interface quick configurations

Nature of PLANET VIP-GW is an IP Sharing (NAT) device, it comes with two default IP addresses, and
default LAN side IP address is "192.168.0.1", default WAN side IP address is "172.16.0.1". You may
use any PC to connect to the LAN port of VIP-GW to start machine administration.
In general cases, the LAN IP address is the default gateway
Hint
of LAN side workstations for Internet access, and the WAN
IP of VIP-GW are the IP address for remote calling party
to connect with.

LAN IP address configuration via web configuration interface

Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: admin / 123), browse to "Advance Setup"
--> "LAN setting" configuration menu:
Please locate your PC in the same network segment
(192.168.0.x) of VIP-GW. If you're not familiar with TCP/IP,
please refer to related chapter on user's manual CD or
consult your network administrator for proper network
configurations.
14