Wan - Planet LCG-300 Series User Manual

OSPF
IGMP
IPv6
DHCP
DDNS
MAC Address
Clone

4.5.1 WAN

This page is used to configure the parameters for Internet network which connects to the WAN port of
the LoRaWAN Gateway as shown in
. Here you may select the access method by clicking the item value of WAN access type.
Disable or enable the OSPF function.
The default configuration is disabled.
Disable or enable the IGMP function.
The default configuration is disabled.
Allows setting IPv6 WAN interface.
Allows setting DHCP Server.
Allows setting DDNS and PLANET DDNS.
Allows setting WAN MAC Address Clone.
Figure 4-5-2
Figure 4-5-2: WAN
- 59 -
Industrial LoRaWAN Gateway
LCG-300 series