Planet MH-2300 User Manual page 76

address entry) for covering the entire subnet, whether it is LAN, WAN, or DMZ.
5. The configuration of each type of network addresses are the same; yet, the
configuration of MAC address and Interface are not available to WAN address
settings.
Step 2. Go to Policy > Outgoing and then configure as below:
Source Address: Select the previously created LAN address.
Service
Click OK.
Creating a Policy to Allow the FTP Access to a LAN User
Select "FTP".
:
Policy Successfully Created
76
Gigabit Multi-Homing VPN Security Gateway
MH-2300