Table of Contents
Advertisement
Step 2. Go to Policy Object > VPN > IPSec Autokey and then click New
Entry.
Step 3. Enter "VPN_B" in the Name field and then select "Port2 (WAN1)" for
Interface.
Step 4. Select "Remote Gateway (Static IP or Hostname)" for Remote
Settings and then enter the gateway address of Company A.
Step 5. Select "Pre-Shared Key" for Authentication Method, and enter a
Pre-Shared Key String. ( The maximum length of the string is 62
characters.)
Step 6. Under the Encryption and Data Integrity Algorithms section, select
"3DES" for Encryption Algorithm, select "MD5" for Authentication
Algorithm, and then select "Diffie-Hellman 1" for Key Group.
The IPSec Autokey Rule Table
The Name and Interface Settings
The Remote Settings
The Authentication Method Settings
The Encryption and Data Integrity Algorithms
Gigabit Multi-Homing VPN Security Gateway
183
MH-2300
Advertisement
Table of Contents
