Table of Contents
Advertisement
For A Company, set as shown below:
Step 1. Go to Policy Object > VPN > IPSec Autokey, and then click New
Entry.
Step 2. Enter "VPN_A" in the Name field and select "Port2 (WAN1)" for
Interface.
Step 3. Select "Remote Gateway (Static IP or Hostname)" for Remote
Settings, and enter the gateway address of B Company.
Step 4. Select "Pre-Shared Key" for Authentication Method, and enter a
Pre-Shared Key String. (The maximum length of the string is 62
characters.
Step 5. In the Encryption and Data Integrity Algorithms section, select
"3DES" for Encryption Algorithm; select "SHA1" for Authentication
Algorithm, and then select "Diffie-Hellman 2" for Key Group.
The IPSec Autokey Rule Table
Name and Interface Settings
Remote Settings
Authentication Method Settings
Encryption and Data Integrity Algorithms
233
Gigabit Multi-Homing VPN Security Gateway
MH-2300
Advertisement
Table of Contents
