Table of Contents
Advertisement
Step 3. Under Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
Specify a name for the VPN trunk.
Local Settings: Select "LAN" for Interface and specify the subnet
and netmask of Company A.
Remote Settings : Specify the subnet and netmask of Company
B.
Select "PPTP_Server_PPTP_01" from the Available Tunnels
column on the left and then click Add.
Tick the box of "Enable NetBIOS Broadcast over VPN".
Click OK to complete the settings.
When specifying the Remote IP Address / Netmask for a PPTP VPN trunk, it
merely takes a PPTP VPN tunnel to meet the requirement.
Gigabit Multi-Homing VPN Security Gateway
Adding a VPN Trunk
VPN Trunk Successfully Added
279
MH-2300
Advertisement
Table of Contents
