Table of Contents
Advertisement
Step 9. Under Policy Object > VPN > Trunk, set as shown below:
Name: Specify a name for the VPN trunk.
Local Settings: Select "LAN" for Interface and specify the subnet
and netmask of Company A.
Remote Settings: Select Remote Client.
Tunnel Selection: Select "VPN_A" from the Available Tunnels
column on the left and then click Add.
Tick the box of "Enable NetBIOS Broadcast over VPN".
Click OK to complete the settings.
Gigabit Multi-Homing VPN Security Gateway
Add a VPN Trunk
VPN Trunk Successfully Added
191
MH-2300
Advertisement
Table of Contents
