Table of Contents
Advertisement
Step 8. Setting completed.
Step 9. Under Policy Object > VPN > Trunk, click the New Entry button and
then set as shown below:
Type the name in the Name field.
Local Settings: Select LAN. Local IP / Netmask: Enter the
subnet and the mask.
Under the Remote Settings section, select Remote IP / Netmask
and then enter the subnet and mask.
Move VPN_01 from the Available Tunnels column to the
Selected Tunnels column.
Tick Enable NetBIOS Broadcast over VPN.
Click OK.
Gigabit Multi-Homing VPN Security Gateway
IPSec Setting Completed
Configuring the Trunk
267
MH-2300
Advertisement
Table of Contents
