Advertisement
4.2. Configuring IP Address
The Cellular Gateway is shipped with default IP address shown below.
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Cellular
Gateway, please use the procedure as follows:
Show the current IP Address
1. At the "#" prompt, enter "nvram get lan_ipaddr".
2. The screen displays the current IP address as shown in Figure 4-4.
Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as
shown in Figure 4-5.
admin@ICG-2510W-LTE: ~# nvram set lan_ipaddr=192.168.4.1
admin@ICG-2510W-LTE: ~# nvram commit
The previous command would apply the following settings for the Cellular
Gateway.
IP Address: 192.168.4.1
Subnet Mask: 255.255.255.0
4. Repeat Step 1 to check if the IP address has changed.
10
Figure 4-4: IP Information Screen
Figure 4-5: Configuring IP Address Screen
Advertisement
